We have learned how to differentiate simple algebraical functions such as x2+c or ax4, and we have now to consider how to tackle the sum of two or more functions.
For instance, let y=(x2+c)+(ax4+b); what will its dydx be? How are we to go to work on this new job?
Subtracting the original y=u+v, we get
and dividing through by dx, we get:
This justifies the procedure. You differentiate each function separately and add the results. So if now we take the example of the preceding paragraph, and put in the values of the two functions, we shall have, using the notation shown (chapter III), dydx=d(x2+c)dx+d(ax4+b)dx=2x+4ax3, exactly as before.
If there were three functions of x, which we may call u, v and w, so that y=u+v+w;thendydx=dudx+dvdx+dwdx.
As for subtraction, it follows at once; for if the function v had itself had a negative sign, its differential coefficient would also be negative; so that by differentiating y=u−v, we should getdydx=dudx−dvdx.
But when we come to do with Products, the thing is not quite so simple.
Suppose we were asked to differentiate the expression y=(x2+c)×(ax4+b), what are we to do? The result will certainly not be 2x×4ax3; for it is easy to see that neither c×ax4, nor x2×b, would have been taken into that product.
Now there are two ways in which we may go to work.
First way. Do the multiplying first, and, having worked it out, then differentiate.
Accordingly, we multiply together x2+c and ax4+b.
This gives ax6+acx4+bx2+bc.
Now differentiate, and we get: dydx=6ax5+4acx3+2bx.
Second way. Go back to first principles, and consider the equation y=u×v; where u is one function of x, and v is any other function of x. Then, if x grows to be x+dx; and y to y+dy; and u becomes u+du, and v becomes v+dv, we shall have: y+dy=(u+du)×(v+dv)=u·v+u·dv+v·du+du·dv.
Now du·dv is a small quantity of the second order of smallness, and therefore in the limit may be discarded, leaving y+dy=u·v+u·dv+v·du.
Then, subtracting the original y=u·v, we have left dy=u·dv+v·du; and, dividing through by dx, we get the result: dydx=udvdx+vdudx.
This shows that our instructions will be as follows: To differentiate the product of two functions, multiply each function by the differential coefficient of the other, and add together the two products so obtained.
Now, having found this rule, apply it to the concrete example which was considered above.
We want to differentiate the product (x2+c)×(ax4+b).
Lastly, we have to differentiate quotients.
Now perform the algebraic division, thus:
Going back to our example y=bx5+cx2+a, writebx5+c=u;andx2+a=v.
The working out of quotients is often tedious, but there is nothing difficult about it.
Some further examples fully worked out are given hereafter.
(1) Differentiate y=ab2x3−a2bx+a2b2.
Being a constant, a2b2 vanishes, and we have dydx=ab2×3×x3−1−a2b×1×x1−1.
But x1−1=x0=1; so we get: dydx=3ab2x2−a2b.
(2) Differentiate y=2a√bx3−3b3√ax−2√ab.
Putting x in the index form, we get y=2a√bx32−3b3√ax−1−2√ab.
Now dydx=2a√b×32×x32−1−3b3√a×(−1)×x−1−1;or, dydx=3a√bx+3b3√ax2.
(3) Differentiate z=1.83√1θ2−4.45√θ−27°.
This may be written: z=1.8θ−23−4.4θ−15−27°.
(4) Differentiate v=(3t2−1.2t+1)3.
A direct way of doing this will be explained later (see here); but we can nevertheless manage it now without any difficulty.
Developing the cube, we get v=27t6−32.4t5+39.96t4−23.328t3+13.32t2−3.6t+1; hence dvdt=162t5−162t4+159.84t3−69.984t2+26.64t−3.6.
(5) Differentiate y=(2x−3)(x+1)2. dydx=(2x−3)d[(x+1)(x+1)]dx+(x+1)2d(2x−3)dx=(2x−3)[(x+1)d(x+1)dx+(x+1)d(x+1)dx]+(x+1)2d(2x−3)dx=2(x+1)[(2x−3)+(x+1)]=2(x+1)(3x−2) or, more simply, multiply out and then differentiate.
(6) Differentiate y=0.5x3(x−3). dydx=0.5[x3d(x−3)dx+(x−3)d(x3)dx]=0.5[x3+(x−3)×3x2]=2x3−4.5x2.
Same remarks as for preceding example.
(7) Differentiate w=(θ+1θ)(√θ+1√θ).
This may be written w=(θ+θ−1)(θ12+θ−12).dwdθ=(θ+θ−1)d(θ12+θ−12)dθ+(θ12+θ−12)d(θ+θ−1)dθ=(θ+θ−1)(12θ−12−12θ−32)+(θ12+θ−12)(1−θ−2)=12(θ12+θ−32−θ−12−θ−52)+(θ12+θ−12−θ−32−θ−52)=32(√θ−1√θ5)+12(1√θ−1√θ3).
This, again, could be obtained more simply by multiplying the two factors first, and differentiating afterwards. This is not, however, always possible; see, for instance, here, example 8, in which the rule for differentiating a product must be used.
(8) Differentiate y=a1+a√x+a2x. dydx=(1+ax12+a2x)×0−ad(1+ax12+a2x)dx(1+a√x+a2x)2=−a(12ax−12+a2)(1+ax12+a2x)2.
(9) Differentiate y=x2x2+1. dydx=(x2+1)2x−x2×2x(x2+1)2=2x(x2+1)2.
(10) Differentiate y=a+√xa−√x.
In the indexed form, y=a+x12a−x12. dydx=(a−x12)(12x−12)−(a+x12)(−12x−12)(a−x12)2=a−x12+a+x122(a−x12)2x12;hencedydx=a(a−√x)2√x.
(11) Differentiate
θ=1−a3√t21+a2√t3.Nowθ=1−at231+at32. dθdt=(1+at32)(−23at−13)−(1−at23)×32at12(1+at32)2=5a26√t7−4a3√t−9a2√t6(1+a2√t3)2.
(12) A reservoir of square cross-section has sides sloping at an angle of 45° with the vertical. The side of the bottom is 200 feet. Find an expression for the quantity pouring in or out when the depth of water varies by 1 foot; hence find, in gallons, the quantity withdrawn hourly when the depth is reduced from 14 to 10 feet in 24 hours.
The volume of a frustum of pyramid of height H, and of bases A and a, is V=H3(A+a+√Aa). It is easily seen that, the slope being 45°, if the depth be h, the length of the side of the square surface of the water is 200+2h feet, so that the volume of water is h3[2002+(200+2h)2+200(200+2h)]=40,000h+400h2+4h33.
dVdh=40,000+800h+4h2= cubic feet per foot of depth variation. The mean level from 14 to 10 feet is 12 feet, when h=12, dVdh=50,176 cubic feet.
Gallons per hour corresponding to a change of depth of 4 ft. in 24 hours =4×50,176×6.2524=52,267 gallons.
(13) The absolute pressure, in atmospheres, P, of saturated steam at the temperature t° C. is given by Dulong as being P=(40+t140)5 as long as t is above 80°. Find the rate of variation of the pressure with the temperature at 100° C.
Expand the numerator by the binomial theorem (see here). P=11405(405+5×404t+10×403t2+10×402t3+5×40t4+t5); hencedPdt=1537,824×105(5×404+20×403t+30×402t2+20×40t3+5t4), when t=100 this becomes 0.036 atmosphere per degree Centigrade change of temperature.
(b) y=ax2+bx+c. (c ) y=(x+a)2.
(3) Find the differential coefficient of y=(x+√−1)×(x−√−1).
(4) Differentiate y=(197x−34x2)×(7+22x−83x3).
(5) If x=(y+3)×(y+5), find dxdy.
(6) Differentiate y=1.3709x×(112.6+45.202x2).
Find the differential coefficients of
Find an expression giving the variation of the current corresponding to a variation of temperature.
Find the change of electromotive-force per degree, at 15°, 20° and 25°.
(1) (a) 1+x+x22+x36+x424+…
(b) 2ax+b.
(c ) 2x+2a.
(d) 3x2+6ax+3a2.
(2) dwdt=a−bt.
(3) dydx=2x.
(4) 14110x4−65404x3−2244x2+8192x+1379.
(5) dxdy=2y+8.
(6) 185.9022654x2+154.36334.
(7) −5(3x+2)2.
(8) 6x4+6x3+9x2(1+x+2x2)2.
(9) ad−bc(cx+d)2.
(10) anx−n−1+bnxn−1+2nx−1(x−n+b)2.
(11) b+2ct.
(12) R0(a+2bt), R0(a+b2√t), −R0(a+2bt)(1+at+bt2)2 or R2(a+2bt)R0.
(13) 1.4340(0.000014t−0.001024), −0.00117, −0.00107, −0.00097.
(14) dEdl=b+ki, dEdi=−c+kli2.